Not just the ordinary
This blog entry goes along with the Youtube video in collaboration with NYC CNC.
All shown parts are uniquely designed and gathered over the years.
More will be shown in part 2 eventually… 😉
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
The coolest trick at the party
The shown air bearing is truly unique and has got some emotional value.
One of the most interesting engineering projects of Roetz 4.0 did start with THIS object and is still present today.
The 3D model can be downloaded here.
All you need on top is a regular balloon.
Lathes, lathes, lathes, lathes!
Nothing comes in more handy than unique 3d-printed fixtures for your CNC machine.
Here you can see a fully adjustable chuck back stop for clamping raw stock very precisely.
Requirements: Clamp parts lengthwise to a tolerance of 0.02mm. Different lengths in the process.
Problems: None!
The collets‘ cap.
Coolant behaves like young kids. It always follows the path of least resistance. In this case, through the collet.
If you’re using spindle through coolant drills this is unwanted and can be altered with this simple part.
Magnetic tool labeling
It can’t get easier than that.
Today most of the conventional lathes are equipped with DRO systems. Having tool offsets calculated by the DRO makes working with a lathe so much easier.
Labeling of the tools is a thin line between „It washes off“ and „I can’t get it off“
These simple and magnetic parts are ending this for ever.
10 x 1 mm neodynium magnets are required.
Sk40 / Bt40 tool holder
Tool carrier are availiable in the most different designs.
Only thing they got in common: They are expensive!
This simple alternative lets you store your tools much cheaper and you can mount it whereever it is needed through the two screw holes.
Tools up to 63mm fit in the holder.
Other types of tools have to be created on inquiry.
